Table of Contents Previous Screen Next Chapter
This operation allows users to register for this service.
If you have registered your user information, you can log in as a user for subsequent procedures.
The registered information will be shown on the initial display for each type of procedure, so you don’t have to enter it again.
After logging in, you can use the [Application Content Inquiry] menu to view past applications that you submitted while logged in. (For details, refer to 2.1.1 Application Inquiry Authentication (Collection of Oversized Garbage), 3.1.1 Application Inquiry Authentication (Bringing In Oversized Garbage), and 4.1.1 Application Inquiry Authentication (Special Collection)）.
If you wish to use this service repeatedly, we recommend registering your user information.
The following information is provided according to user information registration procedures.
・ MEMO: <Supplementary information when accessing the URL in the notification e-mail>
・ MEMO: <About Address Search>
1.
Click the [User Registration] menu.
The «User Registration Explanation Screen» will be displayed.
 |
|
2.
Confirm the Terms of Use, then click Agree .
The «E-mail Address Input Screen (User Registration) Screen» will be displayed.
Note: If you are unable to click [Agree], confirm and scroll through the Terms of Use until the end. Once you have reached the end, [Agree] will become clickable.
 |
|
3.
To register by sending a blank email, please click Send Blank E-mail .
To send a blank e-mail, proceed to Step 4.
To register by entering a User ID, please enter your [E-mail Address] and click Register .
To enter your User ID, proceed to Step 5.
| E-mail Address (User ID) |
Please use an e-mail address that allows you to receive messages. This e-mail address will also be used as your User ID. |
| E-mail address (confirmation) |
Please re-enter the above e-mail address for confirmation. |
 |
|
| Use either function to receive the e-mail. |
4. The system will display a new e-mail. Click the Send button. An e-mail containing a URL will be sent to the e-mail address from which you sent the blank e-mail earlier, so please proceed to Step 6.
 |
|
5.
An e-mail containing a URL will be sent to the e-mail address entered in Step 3.
Access the user registration screen from that URL and continue with the registration process.
 |
|
6.
Click the URL in the message.
The «User Registration Screen» will be displayed.
 |
|
MEMO:
<Supplementary information when accessing the URL in the notification e-mail.>
When you click URL in the received e-mail for registering user information, a new access screen will open and you can enter the rest of the user information on that screen.
You can close the original access screen if you no longer require it.
*2: The new access screen
1. If you access the URL in the notification e-mail while keeping the original screen open, a new access screen will open.
2. The original screen will remain open even after accessing the new screen.
7.
Enter the required items and click Proceed to Confirm .
The «User Registration Confirmation Screen» will be displayed.
Note: The information you registered as a user will be your [User ID (e-mail address)] and [Password] when you next log in.
Please save the information (save or print out the screen, etc.) so you won’t forget the information.
|
Password |
Enter the password. (Use only half-width alphanumeric characters and the symbols listed below) Note: The following symbols can be used: ! # $ % & * + - = ? @ \ _ For security reasons, the entered characters will be shown as dots. Note 1: Input restrictions may vary according to system-side settings. Note 2: Please set a password that is a combination of letters and numbers that would be difficult for a third party to guess. Periodically changing your password is also recommended. |
|
Password (confirmation) |
Reenter the password for confirmation purposes. |
|
Name (furigana) |
Enter the furigana for your first and last name. Both full-width and half-width katakana can be used together, up to 50characters in total. |
|
Full name |
Enter your first and last name. Both full-width and half-width characters can be used together, up to 50characters in total. |
|
Gender |
Select either Male or Female. |
|
Postal code |
Enter your postal code. Use only half-width numbers for the 7-digit postal code. Do not enter the hyphen. (Example：123‐4567 → 1234567) |
|
Address |
Enter your address. Both full-width and half-width characters can be used together, up to 200characters in total. (For details about operations, please refer to MEMO: <About the Address Search function>. |
|
Phone number |
Enter your telephone number. Use only half-width alphanumeric characters, up to 20 characters in total. Do not enter the hyphen. (Example: 090‐xxxx‐yyyy → 090xxxxyyyy) |
|
E-mail address 2 |
If necessary, enter an additional email address other than [E-mail Address 1] that can be used for confirmation of receipt. |
Note 1: When you click Proceed to Confirm , the input content is automatically checked.
If there are any errors, an error message will be displayed on «User Registration Screen».
The cause of the error will be displayed in red text above each entry field that needs to be corrected. Please revise an entry based on the message.
Note 2: When an error message is displayed, the password will be cleared. Please re-enter the password when correcting the field(s) with an error.
  |
|
|
When an error message appears, correctly input the information then re-enter the password and click [Proceed to Confirm]. |
<About the address search function>
This function allows you to input a postal code to automatically fill out the address information.
1. Enter your postal code in [Postal Code]. Omit the hyphen (-).
2. Click [Address Search].
3. The address corresponding to the postal code will be displayed. Add any additional address information.
8.
Confirm the content and click Register .
The «User Registration Completion Screen» will be displayed.
 | |
9. A “User Information Notification E-mail” will be sent to the registered address. Please confirm the e-mail.
 | |